£9.99–£26.84 Incl. VAT
Combining an extremely robust Aluminium carrier and nylon brush, the Weatherbar brush draught excluder is a perfect low cost option for reducing weather ingress under doors. The thick, high quality nylon brush creates a seal between the doorbottom and the floor, this seal prevents cold air travelling through in to rooms and reducing the ambient temperature. The bristles flex forwards and backwards as the door opens and closes.
~ 25mm Nylon Brush
~ Pre-Punched Slotted Hole
~ Complete With Fixings & Instructions
~ Quick & Easy to Fit
~ Strong Aluminium Carrier
~ Easily Trimmed to Exact Size
~ UK Manufactured
Fitting Weatherbar brush draught excluders is a simple and quick task. Before starting you may need the following; a tape measure, screwdriver and junior hacksaw (or other sharp hand saw).
1, Measure the width of your door whilst closed (remember the door needs to open and close freely when the excluder is in place)
2, Cut the draught excluder to the desired length (measure twice, cut once!)
3, Place the draught excluder in the desired position on the door and, whilst applying light downward pressure, screwfix the strip in place (the downward pressure will ensure a tight seal is made with the floor)
NB – It may necessary on some harder fronted doors to drill a pilot hole for the screw before fixing
Weatherbar Coloured Sealant
Weatherbar Metal Coverplate
Weatherbar Wide Foam Seal
Weatherbar 'P' Shaped Rubber Seal
Weatherbar PVC Brush Draught Excluder
"spend a little, save a lot!"
Free delivery on orders over £50