£3.54–£4.69 Incl. VAT
Weatherbar wide draught excluder seal is a close cell foam with an adhesive backing. The elastic properties of the foam allow it to retain shape and form when doors and windows are continually opened and closed. A plastic top coating allow the foam to be wiped clean whilst minimising any pitting that can occur with use. The self adhesive backing provides a strong bond with the frame ensuring the profile stays in position. The excluder foam is the most cost effective solution we provide for reducing felt draughts through doors and windows. Perfect for ill fitting or warped doors and windows.
~ Cost Effective Solution
~ Reduces Draughts Around Doors & Windows
~ Ideal for Warped or Ill Fitting Doors & Windows
~ 5 or 10m Rolls
~ Self Adhesive Backing
Weatherbar draught excluder foam really can be fitted in seconds! The only tools you may need are a craft/stanley knife or a sharp pair of scissors.
1, Wipe clean the surface where the foam is to be placed. Ensure that there is no moisture present by drying with a cloth if necessary.
2, Peel a small amount of the backing off from the foam and position where desired.
3, Carefully peel off more of the backing and apply slight downwards pressure whilst pushing the foam on to the frame.
4, Allow approximately 4 hours for the glue to cure. The foam can be repositioned if removed quickly after setting in place.
Weatherbar Coloured Sealant
Weatherbar 'E' Shaped Rubber Seal
Weatherbar 'P' Shaped Rubber Seal
Weatherbar Door & Window Seal Kit
Weatherbar PVC Brush Draught Excluder
"spend a little, save a lot!"
Free delivery on orders over £50